Back to product overview

ENAMO GRIP

Enamel Protective Coating

ENAMO GRIP is a tough, moisture curing, two-component polyurethane enamel, which produces a uniquely hard and durable coating film. ENAMO GRIP will demonstrate unsurpassed semi-gloss retention, colour-retention, graffiti-resistance, and chalk resistance, when utilized for exterior coating situations, and will provide outstanding resistance to water and humidity, stains, chemicals, and solvents, as well as tremendous scuff-, mar-, and impact-resistance.

Benefits

  • Self-leveling when applied, gives a glossy, smooth-finished surface appearance.
  • Applied as a clear coat, or is tintable to any colour desired.
  • Extremely tough, ENAMO GRIP makes an excellent floor coating.
  • Easily applied to steel, aluminum, concrete or wood.
  • Exceptional graffiti-resistance.
  • Submergible - water resistant
  • 20+ year lifespan on roofing under normal conditions.

Uses

  • Topcoat over Rust Grip® when specific colour is needed, to give a long life to the surface, or to protect against water ponding.
  • Applied over Super Therm® to give the best possible protection for a substrate, or to protect against water ponding.
  • Protects against UV, wear, weathering, and moisture penetration.
  • Seals against breathing moisture/gases and protect against weathering and acid/solvent contact.
  • Anti-graffiti protection for surfaces. Applied and cured, ENAMO GRIP can resist the permanent damage of vandalism.
  • Vehicle and equipment finishes.
  • Flooring, especially when combined with anti-slip elements.

Application

Although ENAMO GRIP can be applied by non-professionals, Superior Products Europe recommends using a certified applicator. Contact Superior Products Europe for details.

Preparation:

  • Surface must be clean and completely dry, with no loose debris or particles, rust, dirt, oil, films or residues of any kind. ENAMO GRIP will cover previous coatings if they are fully adhered to the surface.
  • Mechanically stir base.
  • Mix curing agent into base and let sit for 30 minutes before applying.

Application methods:

  • Airless or pot sprayed: tip size 0.66mm; apply in two coats.
  • Roller: use ¼” nap commercial roller; apply in two coats.
  • Brush: apply in two coats
  • Add an additional coat for vertical surfaces

Applied rate:

Metal: 6.13m2/liter
Concrete or wood: 2.45-3.68m2/liter

Film thickness:

Wet: Metal - 0.127-0.176mm   Wet: Concrete - 0.30-0.38mm
Dry: Metal - 0.051-0.076mm   Dry: Concrete - 0.127-0.176mm

Temperature:

10°C (50°F) - 38°C (100°F)
Colder temperatures will increase dry time.

Dry times:

1 hour to touch.
4 hours to handle.
2 hours to recoat.

Full cure:

4-5 days in warm temps.
7-10 days in cool temps.

Precautions:

6-8 hour pot life
Strong odour during application and initial curing.

Limitations

  • Not intended for use on food preparation surfaces that are in direct contact with foodstuffs.
  • Do not apply over wet or moist surfaces. Surfaces must be completely dry.

If you have any questions or comments about the claims that Superior Products Europe has for any of our products,
please contact us for full documentation.

Back to Top