Product-banners

Chlor*Rid®
Chlor*Rid®
Chlor*Rid®
#00baf2

Product tabs

General
Technical Info
References
More Info

General info:

Because preparation is the key to success...

 

CHLOR*RID is a unique functional performance product which aids in the removal of chlorides, sulfates, nitrates and other surface reacted soluble salts. CHLOR*RID is recommended for use in a maintenance wash solution to reduce corrosion and as part of surface preparation prior to application of primers or coatings on a variety of surfaces, including ferrous and non-ferrous metals, concrete, and others.

 

What is soluble salt contamination?

Soluble salts, like chlorides, sulfates and nitrates are found on surfaces everywhere - in marine environments or as residue left by chemical compounds, like de-icing salts or industrial emissions. Soluble salts pull moisture from the air, causing protective coatings to fail. They can also cause degradation of the substrate, including ferrous and non-ferrous metals, concrete, foam, plastics and others. Left unchecked, the salt contamination corrodes into deep pockets in the substrate, making decontamination more important and challenging. Protective coating failures are costly due to repair and lost productivity, and can be hazardous.

 

What does CHLOR*RID do?

Removing soluble salts from surfaces prior to applying a protective coating is obviously desirable and important. CHLOR*RID is the easiest, safest and most economical method available for removing soluble salts. CHLOR*RID is added to water and applied to the contaminated surface. The chemicals in the CHLOR*RID solution bond with chloride and sulfate ions, etc removing them from the surface. Then protective coatings can be applied.

 

Benefits

- Water soluble

- Biodegradable

- Non-flammable

- No volatile organic compounds

- Economical

- Does not affect coating adhesion

- Environment and worker friendly

 -No health concerns

- No certification required for use

 

How safe is CHLOR*RID?

CHLOR*RID is safe to use and does not pose any health risk when used according to the manufacturer's directions. NSF International has concluded that CHLOR*RID does not pose a health concern and does not require certification for use. CHLOR*RID can satisfy your most aggressive requirements - simply, safely and economically.

CHLOR*RID is an organic bonding chemical blend which aids in the removal of chlorides, sulfates and surface reacted salts. Contains no volatile organic compounds (VOC’s), and is biodegradable.

 

There are several methods for removing soluble salts, but CHLOR*RID is superior. Abrasive blasting often requires repeated blasting. Some abrasives contain salts and actually deposit trace amounts of soluble salts on surfaces. Other methods require heated, de-ionized water which is not available to most field operations, or use of hazardous chemicals - like phosphoric acid - which requires special handling and disposal. Some methods leave residue that interfere with the adhesion of the protective coating, thus contributing to coating failure. CHLOR*RID is used with any potable water source. Performance is enhanced by using heated water, but is not necessary for the solution to be effective. CHLOR*RID should not be rinsed after use and is biodegradable, non-flammable and contains no volatile organic compounds.

 

CHLOR*RID is usually added to the water of the pressure washer, usually in a dilution ratio of 1:100 but can be applied by a variety of means: hand cleaning, pressure washing, UHP water-jetting wet abrasive, and vapor/mist blasting methods.

 

Scanning Electron Microscopy (SEM) inspection by KTA Tator Laboratories established that CHLOR*RID leaves no film or residue after use.

 

For more information please read:

 

TECHNICAL SHEET

APPLICATION INSTRUCTIONS

 

For more information please CONTACT US.

CHLOR*RID is an key ingredient to any successful anti-corrosion project and ensures that large investments do not go to waste due to poor preparation. Please find below a few selected references from our Global Database intended to show the type of solution and markets in which CHLOR*RID  has successfully been used:

SPANISH CEMENT MANUFACTURER
Customer:
CEMENTOS TUDELA VEGUIN
Markets:
Industry & Manufacturing
Product:
Rust Grip®, Moist Metal Grip, Chlor*Rid®
Country:
Spain
MULTINATIONAL UTILITY COMPANY
Customer:
Confidential
Markets:
Energy & Mining
Product:
Rust Grip®, Hot Surface Coating™, Endu Products, Chlor*Rid®
Country:
Confidential
ITALIAN OIL & GAS COMPANY
Customer:
Confidential, Offshore Sub-sea Drilling Risers
Markets:
Energy & Mining
Product:
Rust Grip®, Moist Metal Grip, Enamo Grip, Chlor*Rid®
Country:
Nigeria
PASSENGER SHIP
Customer:
Blue Chip Casino Boat
Markets:
Shipping & Transport
Product:
Rust Grip®, Moist Metal Grip, Enamo Grip, Super Therm®, Chlor*Rid®
Country:
USA
OIL PROCESSING COMPLEX
Customer:
Confidential
Markets:
Energy & Mining
Product:
Rust Grip®, Super Therm®, Chlor*Rid®
AMERICAN MULTINATIONAL OIL & GAS COMPANY
Customer:
Confidential
Markets:
Energy & Mining
Product:
Rust Grip®, Enamo Grip, Chlor*Rid®
Country:
Indonesia

Product more info

Product-images