SP2001F Fire Coating
SP2001F Fire Coating is a ceramic-based, intumiscent, water-borne, fireproofing coating,
that will give a 1 or 2 hour fire rating, depending on the thickness applied.
Benefits
- Unique among fireproofing coatings, as it is a hybrid material with
8 different ceramics and intumiscent additives.
- Humidity and water-resistant.
- Does not flake off like many conventional fireproofing materials.
- Constant adhesion above 2000ºF, stays intact.
- Mould and mildew resistant.
- Fights condensation on its surface.
Uses
Tested for use directly on structural steel to give a one or two hour fire
rating, depending on thickness applied.
Application
Although SP2001F Fire Coating can be applied by non-professionals, Superior Products Europe recommends using a certified applicator. Contact Superior Products Europe for details.
Preparation:
- Surface must be clean and completely dry, with no loose debris or particles,
rust, dirt, oil, films or residues of any kind. SP2001F Fire Coating will cover previous
coatings if they are fully adhered to the surface.
- Mechanically stir, as ceramics will tend to settle.
Application methods:
- Airless sprayed: tip size 1.65mm; build to desired thickness.
- Brush if necessary
Applied rate: |
1 hour fire rating - 0.12m2/liter
2 hour fire rating - 0.073m2/liter
|
Film thickness: |
1 hour fire rating - Wet: 7.62mm Dry: 6.35mm
2 hour fire rating - Wet: 12.7mm Dry: 10.16mm
|
Dry times: |
8 hour to touch.
12 hours to overcoat.
|
Full cure: |
21 days.
|
Limitations
- Not suitable for underwater use of any kind.
- Do not use as floor coating.
- Do not used directly on food preparation surfaces.
- Not to be used as an insulating material.
- SP2001F Fire Coating is grey in colour and rough in texture.
|
If you have any questions or comments about the claims that Superior Products Europe has for any of our products,
please contact us for full documentation.
Back to Top
