Back to product overview

Super Base (HS)

High Performance Base Coat and Primer

SUPER BASE (HS) is a base coat and primer designed to seal cracks, weather seal, and cover surfaces in preparation for the application of SUPER THERM. SUPER BASE is designed from the highest-performance, elastomeric, specially formulated acrylics on the market to provide long lasting sealing and protection.

Benefits

  • Primes and fills in surfaces to best prepare for SUPER THERM
  • Base coat over concrete, blocks, tar, wood, asphalt shingles, fibreglass shingles, polyurethane foam or any substrate that is dry by nature.
  • Applied to all roofing, whether flat or inclined, new or retrofit construction, on most surface types.
  • Stops mould and mildew growth.
  • USDA approved for use in and around food preparation areas.
  • 20+year lifespan under normal conditions.
  • Rough in texture and normally white in colour, although it can be tinted to any colour desired.

Uses

  • Base coat over substrates to improved performance of the topcoat
  • Base coat over substrates to reduce costs for topcoat.
  • Over seams on mobile homes.
  • Over seam cracks on new home construction.
  • As a base coat over porous or dry surfaces to reduce costs.
  • As a weather seal.
  • Can be combined with MULTI-MESH MEMBRANE to form a flat roofing system.

Application

Although SUPER BASE (HS) can be applied by non-professionals, Superior Products Europe recommends using a certified applicator. Contact 1-866-310-7585 for details.

Preparation:

  • Surface must be clean and completely dry, with no loose debris or particles, rust, dirt, oil, films or residues of any kind. SUPER BASE (HS) will cover previous coatings if they are fully adhered to the surface.
  • Mechanically stir.

Application methods:

  • Airless or pot sprayed: apply in one coat using crosshatch method.
  • Roller or brush: apply in two coats.
  • Add an additional coat for vertical surfaces.

Applied rate:

0.73m2/liter on roofing
2.45m2/liter on walls or to seal wood

Film thickness:

Wet: 0.86-0.97mm @ 0.73m2/liter
Dry: 0.45-0.50mm @ 0.73m2/liter

Temperature:

10°C (50°F) - 35°C (95°F).
21° (70°F) best.

Dry times:

1 hour to touch @ 21°C.
4 hours to overcoat.

Full cure:

10 days.

Limitations

  • Not suitable for underwater use of any kind.
  • Do not use as floor coating.
  • Do not used directly on food preparation surfaces.
  • Do not use as an insulating coating.

If you have any questions or comments about the claims that Superior Products Europe has for any of our products,
please contact us for full documentation.

Back to Top