• Markets:Industry & Manufacturing
  • Country:Poland
  • Courtesy of:Superior Products Poland
Project Description

There was a need to reduce heat radiation and save energy from a production furnace.

Coating Solution

Preparation was done by cleaning, degreasing and removing concrements (on cold furnace). Afterwards a combined application of HOT PIPE COATING and HOT SURFACE COATING (on hot furnace) was done followed by 2 coats of RUST GRIP.

On the doors, which were the hottest, HOT PIPE COATING of +/-8mm was applied, followed by 4mm of HOT SURFACE COATING to have a smoother finish. On the rest of the furnace 3mm of HOT SURFACE COATING was applied.


Initial surface temperature: 60°C up to 220°C
After Application surface temperature : between 40°C to 65°C

Products we used

We remain at your disposal for all enquiries you may have about our wide range of products. Have you not found the solution you are looking for, then let us find one for you.