Hot Pipe Coating™ – HT

HPC™-HT ia a two-part hybrid silicone/solvent resin. (Part B is flammable and Part A is water-based). The coating is using specific ceramic compound loads for application directly over surfaces minimum temps of 250°C (482°F) and up to 600°C (1112°F). It was designed to block and hold the interior temperature on the surface and reduce heat transfer loss to ambient.
After Part A and Part B are blended together, HPC™-HT Coating offers a ‘green’, nonflammable, non-toxic formula for high-heat surface applications. HPC™-HT is easily applied, and can be applied direct to metal, concrete and other high-temperature surfaces.
HPC™ HT-PRIMER is applied fist for best adhesion.
If the surface temperature is below 200°C, the HPC™-HT resin will not dry and will remain soft.

For more information please read:

HOT PIPE COATING-HT TECHNICAL SHEET
HOT PIPE COATING-HT APPLICATION INSTRUCTIONS

HOT PIPE COATING-HT has been successfully tried and tested throughout the world and has received numerous certificates to substantiate its effectiveness and reliability. For updated SDS and/or further documents regarding these different test results please contact us.

To be updated …